Suspension Control Arm Link

TGI100065-1-KIT : Trail Gear Creeper Toyota U Joint – 100065-1-KIT : Trail Gear

Trail Gear Creeper Toyota U Joint - 100065-1-KIT 100065-1-KIT

Product:  Trail Gear Creeper Toyota U Joint – 100065-1-KIT

Description:  Trail Gear Creeper Toyota U Joint – 100065-1-KIT:  Forged Body;Tested To 4,700ft-lbs. Of Torque;Will NOT Fit The CV Head Trail-Gear now offers the strongest U-Joint on the market. We took the stock U-joint and kicked it up a notch by adding additional material to center of the joint. The Creeper Joint has been tested to 4,700 ft-lbs of torque in our axle testing machine. These U-joints fit most 1979-1995 4wd applications. Includes four install clips and Zerk grease fitting

SKU:  TGI100065-1-KIT

Manufacture:  Trail Gear

Manufacture Part Number: 100065-1-KIT

Keywords: truck parts truck accessories Trail Gear, Suspension Components, TGI100065-1-KIT

 

****

TER1978226 : TeraFlex FlexArm Kit – 1978226 : TeraFlex

TeraFlex FlexArm Kit - 1978226 1978226

Product:  TeraFlex FlexArm Kit – 1978226

Description:  TeraFlex FlexArm Kit – 1978226:  97-06 Wrangler TJ/LJ;Single arm;Allow custom pinion and caster angles to be set;One adjustable TJ lower long FlexArm The TeraFlex TJ lower long FlexArm can be added to any existing TeraFlex long arm suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes one adjustable TJ lower long FlexArm.

SKU:  TER1978226

Manufacture:  TeraFlex

Manufacture Part Number: 1978226

Keywords: truck parts truck accessories TeraFlex, Suspension Components, TER1978226

 

****

TER4520012 : TeraFlex Large Rubber End – 4520012 : TeraFlex

TeraFlex Large Rubber End - 4520012 4520012

Product:  TeraFlex Large Rubber End – 4520012

Description:  TeraFlex Large Rubber End – 4520012:  Right hand thread;2-5/8 inch shoulder width;1-1/4 inch x 12 TPI shank;Accepts 9/16 inch bolt When a quiet street ride and vibration free driving are required, the rubber bushing ends will give you the feel you want. The rubber bushing will provide the most noise and vibration dampening characteristics possible. This end can also be used as a replacement for any control arm utilizing a 1-1/4 inch x 12 tpi. heim type rod end. Uses a 9/16 inch bolt. RIGHT Hand Thread.

SKU:  TER4520012

Manufacture:  TeraFlex

Manufacture Part Number: 4520012

Keywords: truck parts truck accessories TeraFlex, Suspension Components, TER4520012

 

****

TER1951000 : TeraFlex Large FlexArm Joint Rebuild Kit – 1951000 : TeraFlex

TeraFlex Large FlexArm Joint Rebuild Kit - 1951000 1951000

Product:  TeraFlex Large FlexArm Joint Rebuild Kit – 1951000

Description:  TeraFlex Large FlexArm Joint Rebuild Kit – 1951000:  97-Current Wrangler JK/TJ, 2 & 4 Door;Includes a chrome plated misalignment ball, two urethane bushings, large retainer washer and snap ring The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving conditions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring.

SKU:  TER1951000

Manufacture:  TeraFlex

Manufacture Part Number: 1951000

Keywords: truck parts truck accessories TeraFlex, Suspension Components, TER1951000

 

****

TER3990753 : TeraFlex FlexArm Mount – 3990753 : TeraFlex

TeraFlex FlexArm Mount - 3990753 3990753

Product:  TeraFlex FlexArm Mount – 3990753

Description:  TeraFlex FlexArm Mount – 3990753:  07-Current Wrangler JK, 2 & 4 Door;Driver side front;Bare steel;Laser cut from 1/4? steel;Fits CRD60 axles;Welding required for installation The TeraFlex JK front CRD60 axle bracket upper driver FlexArm mount is precision laser cut from 1/4 inch steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one front lower FlexArm mount and is designed for CRD60 axles (the mount bolts to the CRD60 housing top mounting pad). Welding is required.

SKU:  TER3990753

Manufacture:  TeraFlex

Manufacture Part Number: 3990753

Keywords: truck parts truck accessories TeraFlex, Suspension Components, TER3990753

 

****

TER4520011 : TeraFlex Large Rubber End – 4520011 : TeraFlex

TeraFlex Large Rubber End - 4520011 4520011

Product:  TeraFlex Large Rubber End – 4520011

Description:  TeraFlex Large Rubber End – 4520011:  Left hand thread;2-5/8 inch shoulder width;1-1/4 inch x 12 TPI shank;Accepts 9/16 inch bolt When a quiet street ride and vibration free driving are required, the rubber bushing ends will give you the feel you want. The rubber bushing will provide the most noise and vibration dampening characteristics possible. This end can also be used as a replacement for any control arm utilizing a 1-1/4 inch x 12 tpi. heim type rod end. Uses a 9/16 inch bolt. LEFT Hand Thread.

SKU:  TER4520011

Manufacture:  TeraFlex

Manufacture Part Number: 4520011

Keywords: truck parts truck accessories TeraFlex, Suspension Components, TER4520011

 

****

TER3990090 : TeraFlex FlexArm Mount – 3990090 : TeraFlex

TeraFlex FlexArm Mount - 3990090 3990090

Product:  TeraFlex FlexArm Mount – 3990090

Description:  TeraFlex FlexArm Mount – 3990090:  07-Current Wrangler JK, 2 & 4 Door;Passenger side rear;Bare steel;Laser cut from 1/4? steel;Designed for Dana 60 axles with 3 diameter axle tube;Welding is required The TeraFlex JK rear CRD60 axle bracket lower passenger FlexArm mount is precision laser cut from 1/4 inch steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one rear lower FlexArm mount and is designed for Dana 60 axles with 3 diameter axle tube. Welding is required.

SKU:  TER3990090

Manufacture:  TeraFlex

Manufacture Part Number: 3990090

Keywords: truck parts truck accessories TeraFlex, Suspension Components, TER3990090

 

****

TER3990211 : TeraFlex FlexArm Mount – 3990211 : TeraFlex

TeraFlex FlexArm Mount - 3990211 3990211

Product:  TeraFlex FlexArm Mount – 3990211

Description:  TeraFlex FlexArm Mount – 3990211:  97-06 Wrangler TJ/LJ;Driver side;Precision laser cut from 3/16? steel;Bare steel;Designed for Dana 44 or Dana 60 axles with 3 diameter axle tube;Welding is required The TeraFlex TJ rear axle bracket upper driver FlexArm mount is precision laser cut from 3/16 inch steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one rear upper FlexArm mount and is designed for Dana 44 or Dana 60 axles with 3 diameter axle tube. Welding is required.

SKU:  TER3990211

Manufacture:  TeraFlex

Manufacture Part Number: 3990211

Keywords: truck parts truck accessories TeraFlex, Suspension Components, TER3990211

 

****

TER3990212 : TeraFlex FlexArm Mount – 3990212 : TeraFlex

TeraFlex FlexArm Mount - 3990212 3990212

Product:  TeraFlex FlexArm Mount – 3990212

Description:  TeraFlex FlexArm Mount – 3990212:  97-06 Wrangler TJ/LJ;Passenger side;Precision laser cut from 3/16? steel;Bare steel;Designed for Dana 44 or Dana 60 axles with 3 diameter axle tube;Welding required The TeraFlex TJ rear axle bracket upper passenger FlexArm mount is precision laser cut from 3/16 inch steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one rear upper FlexArm mount and is designed for Dana 44 or Dana 60 axles with 3 diameter axle tube. Welding is required.

SKU:  TER3990212

Manufacture:  TeraFlex

Manufacture Part Number: 3990212

Keywords: truck parts truck accessories TeraFlex, Suspension Components, TER3990212

 

****

TER3990091 : TeraFlex FlexArm Mount – 3990091 : TeraFlex

TeraFlex FlexArm Mount - 3990091 3990091

Product:  TeraFlex FlexArm Mount – 3990091

Description:  TeraFlex FlexArm Mount – 3990091:  07-Current Wrangler JK, 2 & 4 Door;Driver side rear;Bare steel;Laser cut from 1/4? steel;Welding required for installation;Designed for Dana 60 axles with 3 diameter axle tube The TeraFlex JK rear CRD60 axle bracket lower driver FlexArm mount is precision laser cut from 1/4 inch steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one rear lower FlexArm mount and is designed for Dana 60 axles with 3 diameter axle tube. Welding is required.

SKU:  TER3990091

Manufacture:  TeraFlex

Manufacture Part Number: 3990091

Keywords: truck parts truck accessories TeraFlex, Suspension Components, TER3990091

 

****