Back Up Light Assembly

W/I2910 : Warrior Universal LED 2 Inch Reverse Light Kit – 2910 : Warrior

Warrior Universal LED 2 Inch Reverse Light Kit - 2910 2910

Product:  Warrior Universal LED 2 Inch Reverse Light Kit – 2910

Description:  Warrior Universal LED 2 Inch Reverse Light Kit – 2910:  9 LED lights;2.5 inch grommets;Wiring pigtails;Lifetime warranty;Made in U.S.A. 9 LED Ultra White Reverse Light Kit 2.5 Grommet mounted reverse light kit. Includes 2 grommets, 2 lights, and 2 wiring pigtails. Lights are made in the USA and carry a lifetime warranty.

SKU:  W/I2910

Manufacture:  Warrior

Manufacture Part Number: 2910

Keywords: truck parts truck accessories Warrior, Replacement Headlights, Tail Lights, and Factory Lighting, W/I2910

 

****

REC264150 : Recon Projector Back-Up Reverse Light Kit – 264150 : Recon

Recon Projector Back-Up Reverse Light Kit - 264150 264150

Product:  Recon Projector Back-Up Reverse Light Kit – 264150

Description:  Recon Projector Back-Up Reverse Light Kit – 264150:  Two powerful high-output Superwhite Xenon lamps;110 watts of power;Produces 250,000 candlepower;100% waterproof design;Salt-water safe;Activates automatically when vehicle is in reverse;Adjustable Mounting Brackets;Reinforced high impact aluminum casing Its easy to drive a vehicle forward with your headlights illuminating the way, but navigating a vehicle in reverse at night is a different story all together especially if your towing a trailer or hauling a load. Tiny factory installed O.E. back-up lights just don’t cut it when safety and peace of mind are at stake. From cramped urban parking lots to poorly lit boat ramps, RECON Truck Accessories offers you a brighter solution to backing your vehicle into and out of any situation. Light em Up With RECON Truck Accessories new 2-piece back-up reverse light kit for nearly all makes & models of truck, SUV and even passenger car.

SKU:  REC264150

Manufacture:  Recon

Manufacture Part Number: 264150

Keywords: truck parts truck accessories Recon, Replacement Headlights, Tail Lights, and Factory Lighting, REC264150

 

****

K/C312 : KC HiLites LZR LED Flush Mount Backup Light System – 312 : KC HiLites

KC HiLites LZR LED Flush Mount Backup Light System - 312 312

Product:  KC HiLites LZR LED Flush Mount Backup Light System – 312

Description:  KC HiLites LZR LED Flush Mount Backup Light System – 312:  2 x 10W 3 LZR Cube LED Flush Mount Lights;Durable Diecast Aluminum Housing;UV Resistant Powder Coated Flush Mount Plate;Shatter Resistant Polycarbonate Lens;Forward Facing Reflector Optics;40? Flood Beam Pattern;Extended Backup Wiring Harness with Weather Proof DT Connectors and Switch KC’s LZR LED Backup light system uses a 40? Flood Beam Pattern to provide powerful rear and peripheral illumination around your vehicle, improving night time visibility when reversing. Includes extended wiring harness for easy install. KC’s unique 40? flood beam pattern provides evenly distributed light output to provide incredible rear and peripheral illumination without any glare often found with other lighting options. This results in a dramatic improvement in night time visibility, as well as driving safety. Aluminum Flush mount plates act as a front bezel allowing you to mount 3 LZR LED Cubes to any flat surface, ideal for rear bumper application on any vehicle. Using a stylish recessed fit you get minimum light exposure for added protection and peace of mind. Constructed from a lightweight IP67 rated sealed Aluminum Die-Cast Housing with a durable polycarbonate lens for an impenetrable housing coupled with an advanced Turbine Heat-Sink design for maximum heat dissipation, ensuring optimum light performance.

SKU:  K/C312

Manufacture:  KC HiLites

Manufacture Part Number: 312

Keywords: truck parts truck accessories KC HiLites, Replacement Headlights, Tail Lights, and Factory Lighting, K/C312

 

****

K/C1312 : KC HiLites LZR LED Flush Mount Backup Light – 1312 : KC HiLites

KC HiLites LZR LED Flush Mount Backup Light - 1312 1312

Product:  KC HiLites LZR LED Flush Mount Backup Light – 1312

Description:  KC HiLites LZR LED Flush Mount Backup Light – 1312:  10W 3 LZR Cube LED Flush Mount Light;Durable Diecast Aluminum Housing;UV Resistant Powder Coated Flush Mount Plate;Shatter Resistant Polycarbonate Lens;Forward Facing Reflector Optics;40? Flood Beam Pattern;Extended Backup Wiring Harness with Weather Proof DT Connectors and Switch;Sold individually KC’s LZR LED Backup light system uses a 40? Flood Beam Pattern to provide powerful rear and peripheral illumination around your vehicle, improving night time visibility when reversing. Includes extended wiring harness for easy install. KC’s unique 40? flood beam pattern provides evenly distributed light output to provide incredible rear and peripheral illumination without any glare often found with other lighting options. This results in a dramatic improvement in night time visibility, as well as driving safety. Aluminum Flush mount plates act as a front bezel allowing you to mount 3 LZR LED Cubes to any flat surface, ideal for rear bumper application on any vehicle. Using a stylish recessed fit you get minimum light exposure for added protection and peace of mind. Constructed from a lightweight IP67 rated sealed Aluminum Die-Cast Housing with a durable polycarbonate lens for an impenetrable housing coupled with an advanced Turbine Heat-Sink design for maximum heat dissipation, ensuring optimum light performance.

SKU:  K/C1312

Manufacture:  KC HiLites

Manufacture Part Number: 1312

Keywords: truck parts truck accessories KC HiLites, Replacement Headlights, Tail Lights, and Factory Lighting, K/C1312

 

****

K/C519 : KC HiLites C2 LED Reverse Light – 519 : KC HiLites

KC HiLites C2 LED Reverse Light - 519 519

Product:  KC HiLites C2 LED Reverse Light – 519

Description:  KC HiLites C2 LED Reverse Light – 519:  Universal application;2,000 Lumens;20 watts;LED: 2 x 10W Cree XMK LED;Color Temp: 6000K;Sold as a pair KC C-Series LED Lights combine optical led performance, rigid and strong bar construction and extreme affordability. Their C Series LED lights are available from a compact 3 C3 square LED light available in spot and flood beam pattern to our performance LED light bars are available in 10 to 50 versatile widths. All C-Series LED lights are great for having performance off road LED lights for your Jeep, Truck, SUV and UTVs.

SKU:  K/C519

Manufacture:  KC HiLites

Manufacture Part Number: 519

Keywords: truck parts truck accessories KC HiLites, Replacement Headlights, Tail Lights, and Factory Lighting, K/C519

 

****

K/C1017 : KC HiLites LED Backup Light – 1017 : KC HiLites

KC HiLites LED Backup Light - 1017 1017

Product:  KC HiLites LED Backup Light – 1017

Description:  KC HiLites LED Backup Light – 1017:  6 inch oval clear LED backup light;UV and impact resistant polycarbonate lens;100,000 hour life span;Mounting grommet (part #1037) and wire plug (part #1040) sold separately KC HiLiTES offers a variety of quality LED Tail, Brake, Turn, Back-up and Clearance lights for Utility, Industrial and Recreational use. KC LEDs are made with Impact and UV resistant Polycarbonate lenses that are sonically sealed to prevent moisture issues. These long-life LEDs last in excess of 100,000 hours which far exceeds any other light source available and provide increased visibility and safely.

SKU:  K/C1017

Manufacture:  KC HiLites

Manufacture Part Number: 1017

Keywords: truck parts truck accessories KC HiLites, Replacement Headlights, Tail Lights, and Factory Lighting, K/C1017

 

****

ARB8161 : ARB IPF Back-up Light Kit – ARB8161 : ARB 4×4 Accessories

ARB IPF Back-up Light Kit - ARB8161 8161

Product:  ARB IPF Back-up Light Kit – ARB8161

Description:  ARB IPF Back-up Light Kit – ARB8161:  Rectangle;1 light only Includes 1 light with weatherproof connectors, complete snap together wiring loom and relay and unique 3 position switch. IPF engineers consider all aspects of driving light performance when designing each lighting system, especially those related to real world conditions. By focusing light properly in front of the vehicle, IPF driving lights actually increase visible range thus improving your ability to react and reducing driver fatigue.

SKU:  ARB8161

Manufacture:  ARB 4×4 Accessories

Manufacture Part Number: 8161

Keywords: truck parts truck accessories ARB 4×4 Accessories, Replacement Headlights, Tail Lights, and Factory Lighting, ARB8161

 

****