Bumper Mounting Kit

PSC14-61-710 : Poison Spyder Custom TJ Rear Bumper Brace Kit – Jeep TJ : Poison Spyder Customs

Poison Spyder Custom TJ Rear Bumper Brace Kit - Jeep TJ 14-61-710

Product:  Poison Spyder Custom TJ Rear Bumper Brace Kit – Jeep TJ

Description:  Poison Spyder Custom TJ Rear Bumper Brace Kit – Jeep TJ:  97-06 Wrangler TJ/LJ;3/16 steel plate;Gussetted brace The Poison Spyder Jeep TJ Rear Bumper Brace Kit adds more strength to your TJs rear bumper mounting. This is especially important if you intend to tow, use bumper-mounted recovery points, or a bumper-mounted spare tire carrier. This is a recommended upgrade for all Poison Spyder TJ rear bumpers, including the RockBrawler and BFH line of rear bumpers.

SKU:  PSC14-61-710

Manufacture:  Poison Spyder Customs

Manufacture Part Number: 14-61-710

Keywords: truck parts truck accessories Poison Spyder Customs, Bumper Accessories, PSC14-61-710

 

****

OAI11811.64 : Omix-Ada Front Bumper Molding Clip – 11811.64 : Omix-Ada

Omix-Ada Front Bumper Molding Clip - 11811.64 11811.64

Product:  Omix-Ada Front Bumper Molding Clip – 11811.64

Description:  Omix-Ada Front Bumper Molding Clip – 11811.64:  07-Current Patriot;Replacement part Omix-ADA proudly offers high-quality replacement parts for your Jeep vehicle that always meet or exceed OE standards. This replacement front bumper molding clip fits 07-17 Compass / Patriot models. Replaces OE 6508947AA

SKU:  OAI11811.64

Manufacture:  Omix-Ada

Manufacture Part Number: 11811.64

Keywords: truck parts truck accessories Omix-Ada, Bumper Accessories, OAI11811.64

 

****

OAI11811.32 : Omix-Ada Front Bumper Retainer – 11811.32 : Omix-Ada

Omix-Ada Front Bumper Retainer - 11811.32 11811.32

Product:  Omix-Ada Front Bumper Retainer – 11811.32

Description:  Omix-Ada Front Bumper Retainer – 11811.32:  05-Current Grand Cherokee WK;Replacement part Omix-ADA proudly offers high-quality replacement parts for your Jeep vehicle that always meet or exceed OE standards. This replacement front bumper retainer fits 05-17 Grand Cherokee WJ models. Replaces OE 68033794AA

SKU:  OAI11811.32

Manufacture:  Omix-Ada

Manufacture Part Number: 11811.32

Keywords: truck parts truck accessories Omix-Ada, Bumper Accessories, OAI11811.32

 

****

OAI11811.63 : Omix-Ada Rear Bumper Fascia Clip – 11811.63 : Omix-Ada

Omix-Ada Rear Bumper Fascia Clip - 11811.63 11811.63

Product:  Omix-Ada Rear Bumper Fascia Clip – 11811.63

Description:  Omix-Ada Rear Bumper Fascia Clip – 11811.63:  05-10 Grand Cherokee WK;Replacement part;5 year limited Omix-ADA proudly offers high-quality replacement parts for your Jeep vehicle that always meet or exceed OE standards. This replacement rear bumper fascia clip fits 05-10 Grand Cherokee WK models. Replaces OE 5159077AA

SKU:  OAI11811.63

Manufacture:  Omix-Ada

Manufacture Part Number: 11811.63

Keywords: truck parts truck accessories Omix-Ada, Bumper Accessories, OAI11811.63

 

****

KEN30527 : Kentrol Rear Bumper Brackets – 30527 : Kentrol

Kentrol Rear Bumper Brackets - 30527 30527

Product:  Kentrol Rear Bumper Brackets – 30527

Description:  Kentrol Rear Bumper Brackets – 30527:  87-95 Wrangler YJ;Made of 304 grade stainless steel;Comes as a pair;For mounting front bumper to rear;To be used with 30436,and 30437 bumpers These brackets are required to install a front stainless steel bumper on the rear of a YJ Wrangler. Brush finished stainless steel and includes all mounting hardware. Fits on 30436 and 30437 bumpers. Made of 304 grade stainless steel. Why buy Kentrol Stainless Steel? Because it is the best! Not all Stainless Steel products are created equal. Kentrol products are constructed of virgin metal, 304 Surgical, Stainless Steel. This stuff just will not rust! it is easy to care for too – an occasional waxing will keep the mirror-like shine looking brand new. And to top it off – all Kentrol products come complete with Stainless Steel hardware.

SKU:  KEN30527

Manufacture:  Kentrol

Manufacture Part Number: 30527

Keywords: truck parts truck accessories Kentrol, Bumper Accessories, KEN30527

 

****

JCRSWBTI-CJ-P : JcrOffroad Rear Bumper Frame Tie-in – SWBTI-CJ-P : JcrOffroad

JcrOffroad Rear Bumper Frame Tie-in - SWBTI-CJ-P SWBTI-CJ-P

Product:  JcrOffroad Rear Bumper Frame Tie-in – SWBTI-CJ-P

Description:  JcrOffroad Rear Bumper Frame Tie-in – SWBTI-CJ-P:  76-86 CJ7;Black powder coat;Made from 3/16 steel;Sold as a pair;Made in the USA;Mfg Sku: SWB-TI-CJ-PC These brackets allow for reinforcement of the Jeeps rear cross member and attach directly to the frame rails giving you a rigid and exceptionally strong mounting configuration. Use with our Crusader Rear Bumpers, other aftermarket brands or perhaps for your own custom application. These Tie-in Brackets are custom built in house by JcrOffroad therefore quality is unsurpassed by other manufacturers. They are constructed from 3/16 thick high strength steel. Installation is bolt on using factory provisions. Includes (2) brackets and needed hardware.

SKU:  JCRSWBTI-CJ-P

Manufacture:  JcrOffroad

Manufacture Part Number: SWBTI-CJ-P

Keywords: truck parts truck accessories JcrOffroad, Bumper Accessories, JCRSWBTI-CJ-P

 

****

JCRSWBTI-TJ-P : JcrOffroad Rear Bumper Frame Tie-in – SWBTI-TJ-P : JcrOffroad

JcrOffroad Rear Bumper Frame Tie-in - SWBTI-TJ-P SWBTI-TJ-P

Product:  JcrOffroad Rear Bumper Frame Tie-in – SWBTI-TJ-P

Description:  JcrOffroad Rear Bumper Frame Tie-in – SWBTI-TJ-P:  87-06 Wrangler TJ/YJ;Black powder coat;Made from 3/16 steel;Sold as a pair;YJ models require welding for installation;TJ model is bolt on;Made in the USA;Mfg Sku: SWB-TI-TJ-PC These brackets allow for reinforcement of the Jeeps rear cross member and attach directly to the frame rails giving you a rigid and exceptionally strong mounting configuration. Use with our Crusader Rear Bumpers, other aftermarket brands or perhaps for your own custom application. These Tie-in Brackets are custom built in house by JcrOffroad therefore quality is unsurpassed by other manufacturers. They are constructed from 3/16 thick high strength steel. 1997 to 2006 Installation is bolt on using factory provisions. 1987 to 1995 models will require welding to install. Includes (2) brackets and needed hardware.

SKU:  JCRSWBTI-TJ-P

Manufacture:  JcrOffroad

Manufacture Part Number: SWBTI-TJ-P

Keywords: truck parts truck accessories JcrOffroad, Bumper Accessories, JCRSWBTI-TJ-P

 

****

JCRSWB-TI-TJ-PC : JcrOffroad Rear Bumper Frame Tie-in – SWB-TI-TJ-PC : JcrOffroad

JcrOffroad Rear Bumper Frame Tie-in - SWB-TI-TJ-PC SWB-TI-TJ-PC

Product:  JcrOffroad Rear Bumper Frame Tie-in – SWB-TI-TJ-PC

Description:  JcrOffroad Rear Bumper Frame Tie-in – SWB-TI-TJ-PC:  97-06 Wrangler TJ/LJ;Black;Powder coated;Expertly crafted from premium materials Armor for Jeeps, Handmade in the USA. On the surface that statement seems simple, but you wouldn’t believe how complex it really is. At JcrOffroad we build products for your Jeep at our facility in Portage, Michigan. We build products on American made equipment. We use American steel and hardware. We employ American craftsmen. JcrOffroad is known for its devotion to manufacturing high-grade parts for Jeeps, including sliders, bumpers, and armor. Founded in 2003, the company has quickly gained a reputation as one of Americas leading manufacturers of Jeep parts and accessories. Located in Portage, Michigan, JcrOffroad builds the products from high-quality steel using American made CNC equipment. The parts are designed by the most experienced craftsmen to ensure the utmost in performance and durability. That’s why the company stands behind their products with a lifetime warranty.

SKU:  JCRSWB-TI-TJ-PC

Manufacture:  JcrOffroad

Manufacture Part Number: SWB-TI-TJ-PC

Keywords: truck parts truck accessories JcrOffroad, Bumper Accessories, JCRSWB-TI-TJ-PC

 

****

JCRXJUNF-PC : JcrOffroad Unibody Tie-in Kit with Steering Spacer – XJUNF-PC : JcrOffroad

JcrOffroad Unibody Tie-in Kit with Steering Spacer - XJUNF-PC XJUNF-PC

Product:  JcrOffroad Unibody Tie-in Kit with Steering Spacer – XJUNF-PC

Description:  JcrOffroad Unibody Tie-in Kit with Steering Spacer – XJUNF-PC:  84-01 Cherokee XJ;Black powder coat;Add strength for tough recovery situations;Made in the USA;Mfg Sku: XJUNF-PC JCR front bumpers mount to the standard 3-hole mounting pattern on the front of the Uniframe, this is the stock bumper mounting location and provides plenty of support for on-road driving and LIGHT vehicle recovery while off-road. The weakness of this mounting system is not the bumper brackets or the bolts themselves, its the leverage created by the bumper to tear the holes in the front of Uniframe with hard front or side pulls. For those looking for more recovery options off-road we offer our Crusader Uniframe Reinforcement kit (Because hey, we all get into situations we never thought we would)! The main brackets sandwich the outer Uniframe (using the standard 3-hole bolt pattern on the front of your XJ) and continue 14.5 down the Uniframe. Along the way (on the driver side) they brace all three of the steering box bolts, and run through the large sleeved hole about 12 from the front of the frame. The brackets also formed to bend underneath to tie in the swaybar mounting location for even more strength! Additional brackets are formed to tie the front factory bulkhead into the main Uniframe brackets, while reinforcing the front bumper mounting holes with 3/8 of additional material. Not only do these brackets distribute the forces you put on your bumper on a larger area, they brace the steering box by stiffening the Uniframe in that location, while also stiffening the whole front end of your Jeep. Price includes 2 main brackets, 2 bulkhead brackets, a steering spacer and all the bolts needed for the entire install! Also included are 3 new grade 8 steering box bolts.

SKU:  JCRXJUNF-PC

Manufacture:  JcrOffroad

Manufacture Part Number: XJUNF-PC

Keywords: truck parts truck accessories JcrOffroad, Bumper Accessories, JCRXJUNF-PC

 

****